Bad antenna reception could be caused by a weak or zero signal. It may also be electromagnetic interference or a faulty device. Whatever the cause is, bad reception gives you broken images. It also causes multicoloured static or a direct message that reads “No signal” or “Bad signal.”
Some factors that may cause lousy TV antenna reception are location, antenna height, and direction. Some antennas are just built to work better in specific locations. Some are primed to pick better signals in particular directions. Others thrive better when placed in higher positions. This is true of outdoor antennas. They have proved very good, primarily when placed high above the roof. Specific household equipment, especially those that transmit some forms of frequencies, are also known to interfere with antenna receptivity, and finally, some antenna products are better than others.
How To Get Clear TV Antenna Reception?
Location is very important.
Speaking of location, there are two locations you have to put in mind. The first is the broadcast tower location in your area, and the second is the location where you’ll place your antenna.
Getting the broadcast location of towers around you can take time and effort. To save you time and stress, you can visit some websites where you can quickly locate broadcasting towers near your home address.
Knowing the nearest broadcast tower location guides your choice of the type of antenna to buy because each antenna has its respective capabilities and limitations in picking broadcasts at certain distances.
Therefore, for instance, it would be very wrong to get an antenna that can receive traffic at a maximum distance of 25km when the nearest broadcast station is 30km away. Also, placing your antenna at the correct location within your house is essential. Every home has a spot that aids strong signal receptivity, and understanding this location requires a lot of hit-and-miss.
You should start with any location you intuitively deem best, then run a channel scan and see if you have good reception. If the reception is terrible, you need to try out other spots and run a scan at each new spot till you find your home’s particular spot. Fortunately, location doesn’t stop you from enjoying entertainment at Best Online Roulette in NZ; try it now.
Higher positions are usually the best
To get clear signal reception, the importance of height cannot be over-emphasised for antennas. One straightforward way to achieve this is to mount your antenna on the roof or raise it with a pole. This could be challenging for indoor antenna models, usually placed at the same height as your TV. It is recommended to find a slightly elevated position that gives the antenna some height over the Television. If your home is multistoried or incorporates an attic design, place your antenna on the upper story or top of the attic.
Understand your antenna design and characteristics
Antennas have different characteristics, such as range, directional function, and location adherence. Understand whether you have an indoor or outdoor antenna. Also understand whether your antenna is monodirectional. This means it will require you to point it toward the broadcast relay station near you. There are multidirectional antennas that don’t require pointing at any specific location. However, from user experience, it has been noted that multidirectional antennas are usually shorter-ranged than their monodirectional counterparts. Therefore, understanding all the essential characteristics and design goes a long way.
Check obstructions and interference
Several things could interfere with your antenna reception. Some of these include metal objects, wireless broadcasting and receiving devices. Other physical structures such as walls, trees, or other large structures may also disturb.
A simple way to avoid indoor obstructions is to place your antenna outdoors. If it must be indoors, then place it near the window, far away from any devices or obstructions. If your home has more than one window, and you still feel interference with your antenna. Try several windows until you find one with no obstructions or interference.
Troubleshooting TV antenna reception issues
- Make sure you are within range of the nearest broadcast towers
- Check your antenna cable for cuts and corrosions
- For long cables, make sure also to use a preamplifier
- Run channel scans regularly
